工业吸尘器

INDUSTRIAL VACUUM CLEANER

产品特点

1. 采用无碳刷高压风机，采用双频（50/60Hz）及宽电压的设计，采用 NSK 轴承，增加风机的使用寿命，让机器可以连续工作。

2. 电机出风口处安装有不锈钢消音器，让您有一个安静的工作环境，机器可以连续工作，并且还能过滤并排出的洁净空气。

3. 滤芯采用聚酯纤维制造而成，过滤面积为 28000cm2，表面光滑，能过滤细小粉尘，排出的洁净空气。

4. 内置旋风分离器与手动清尘配合使用，清理滤芯时上下摇动手动振尘杆就能将过滤器清理干净，在开机状态下同样可以清理。

5. 100L容量集尘桶，收集效率高，分离式集尘桶，清尘方便快捷，也可加装集尘袋，不会二次污染环境。

6. 电控线路采用德力西品牌，车架与集尘桶采用不锈钢制造，100L大容量集尘桶，收集效率高。

7. 可吸取物: 可吸收粉尘、颗粒、液体、医药、电子、食品加工、机械制造、潮湿固态物质，金属加工等场所，与生产线或生产设备配套使用。可以根据您的工况及个人要求，定制出适用于您场所的吸尘器。

1. Adopting carbonless brush high pressure fan, adopting dual frequency (50/60Hz) and wide voltage design, adopting NSK bearing to increase the service life of the fan, allowing the machine to work continuously.

2. The stainless steel silencer is installed at the air outlet of the motor, so that you have a quiet working environment, the machine can work continuously,and it can also filter and discharge clean air.

3. The filter element is made of polyester fiber with a filtration area of 28000cm2. The surface is smooth and can filter fine dust and clean air.

4. The built-in cyclone separator is used in combination with manual dust cleaning. When cleaning the filter element, the manual vibration rod can be shaken up and down to clean the filter. It can also be cleaned up in the power-on state.

5. 100L capacity dust bucket, high collection efficiency, separate dust collecting bucket, easy to clean dust, can also be installed dust bag, will not pollute the environment.

6. The electronic control circuit adopts the Delixi brand. The frame and dust collecting barrel are made of stainless steel, and the 100L large-capacity dust collecting bucket has high collection efficiency.

7. Absorbables: It can absorb dust, granules, liquids, medicine, electronics, food processing, machinery manufacturing, wet solid materials, metal processing and other places, and is used in conjunction with production lines or production equipment.

You can customize the vacuum cleaner for your location according to your working conditions and personal requirements.